Thermosafe
Shippers, Containers, and Temperature Assurance Materials
U-TEK REFRIGERANT GEL PACKS
U-Tek Refrigerant Gel Packs
Nothing Compares to the Durability and Convenience of U-TEK Refrigerant Gel Packs
U-TEKs are a clean, low cost alternative to wet or dry ice. Constructed of a laminated metallized polyethylene film, U-TEK's foil packaging is durable, puncture-resistant and won't leak. When used to replace wet ice, U-TEK's eliminate the wet mess--returning to a gel after thawing. Each pack can be used repeatedly, is harmless to handle and non-toxic. U-TEKs are available in both -23°C and -1°C formulations so they are an ideal choice for many applications.

U-Tek Refrigerant Gel Packs

Test Results: A U-TEK gel pack (19.0 x 16.5 x 2.5 cm) with a -1°C formulation placed in an insulated container (3.8 cm wall thickness) at temperatures between 21°C.and 23°C kept the materials at or below 5.6°C for over 60 hours.

A U-TEK gel pack (19.0 x 16.5 x 2.5 cm) with a -23°C formulation placed in an insulated container (3.8 cm wall thickness) at temperatures between 21°C.and 23°C kept the materials at or below 0°C for over 40 hours.

Insul-Ice™...a new form of ice that lasts longer, eliminates the wet mess, and is reInsul-Iceusable.

Introducing Insul-Ice- small packets of a patented refrigerant sealed between layers of durable, flexible plastic film. The result is an ingenious new ice that:

• Won't melt into a watery mess.
• Stays cold one-third longer than regular ice.
• Is completely reusable.

The refrigerant in Insul-Ice contains neutral pH distilled or de-ionized water and proprietary materials which comply with FDA regulations for food-grade chemicals, and have acceptance by the U.S. Department of Agriculture for direct contact with food. The durable, laminated plastic film used in  nsul-Ice withstands pressures of 60 pounds per square inch for more than 5 minutes.

  The Insul-Ice Advantage

     Insul-Ice stays colder longer than regular ice.  In independent tests, Insul-Ice remained effective one-third longer
     than ordinary ice.

     Insul-Ice is reusable.  Refreeze and use it repeatedly. Insul-Ice works best when frozen to -10°C or below in a
     standard freezer.

     Two Styles
     Insul-Ice Singles are an ideal substitute for crushed ice or cubes in displays, anywhere old fashioned ice is used to
     keep foods cold.

     Insul-Ice Mat offers maximum convenience. Cut only what you need from the master sheet. Even when frozen, the
     plastic film between packets remains flexible for wrapping food containers or folding over on itself for double or triple
     thick cold blankets.

Insta-Ice Solid Dry Ice Block Machines
Insta-Ice Solid Dry Ice Block Machines

Make ready-to-use blocks of dry ice in 60 seconds anywhere
With an Insta-lce dry ice machine and a tank of liquid CO2 (available from industrial gas dealers nationwide), solid blocks of dry ice are right at hand.

Quick and simple operation

To make dry ice, just hook up the machine to a liquid CO2 cylinder (with a siphon). Remove finished blocks by releasing the metal latches and lifting the dry ice out of the block-forming chamber. The blocks are ready to use or store, and need no compacting. The entire process takes about one minute for a one-pound block.
 Insta-Ice Specifications

 Model 460

 Model 475

 Model 485
 Weight of dry ice block
  1 lb. ± 10%  1.7 lb. ± 10%  3.2 lb. ± 10%
 Dimensions of dry ice block (in inches)
  7 x 3 x 1 7/8  7 x 3 3/8 x 2 5/8  5 1/4 x 3 3/8 x 7 1/8
 Yield from 50 lb. CO2 cylinder at room temperature*
  9-11 blocks  6-7 blocks  3 blocks
 Weight of machine
  5 lbs.  6 lbs.  8 lbs.
 Dimensions of machine excluding flexible hose
 and  valves(in  inches)
  8 1/2 x 4 3/4 x 4 3/4  9 1/4 x 6 1/4 x 4 3/4  7 1/4 x5 3/4 x 9

For more Information, please contact us at medical@jdhintl.com

Overall, temperatures rose approximately 0.3 degree C per hour during the test.
Optimum results are obtained by storing lower temperature U-TEKs in a freezer at -23°C or colder before using.
The gel packs come in different sizes and weight:
Size Case Pack
 -1° C Formulation
-23°C Formulation
15.2 x 10.2 x 1.9 cm: 227 gr 36 packs per case
Model 429
Model 432
17.1 x 10.2 x 2.5 cm: 340 gr 24 packs per case
Model 412
Model 418
16.5 x 16.5 x 2.0 cm: 454 gr 16 packs per case
Model 596
Model 597
19.0 x 16.5 x 2.5 cm: 680 gr 12 packs per case
Model 414
Model 420
23.8 x 19.7 x 2.5 cm: 907 gr 8 packs per case
Model 598
Model 599
26.7 x 19.7 x 3.0 cm: 1361 gr 6 packs per case
Model 426
Mdoel 427
Insul-Ice™
 Model
Size
 Case Weight
Model 405 Insul-Ice Mat
Master sheet approx. 41 cm x 86 cm
 23 kgs
Model 406J Insul-Ice Singles
1500 individual packets each approx.
7.6 cm x 3.8 cm
 23 kgs

Headquarters:
650 Dundee Road, Suite 150
Northbrook, IL 60062 U.S.A.
Tel: 847-412-0200 - Fax: 847-412-0034
E-mail: medical@jdhintl.com




2012 J.D. Honigberg International, Inc.
J.D. Honigberg International, Inc.
International Sales and Export Management
Medical and Hospital Equipment
Drop Down Menu